Lift Kit Suspension for 2022-2023 Toyota Tundra 3-3'' Lift Front and Rear, Rear, Front

K7089DL Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Rear, Front]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Rear Dirt Logic Shock Absorbers In Kit; Black Components; With Front Strut Assembly Spacers/ Rear Air Bag Spacers/ Front Upper Control Arms/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Air Bag Spacer Maximum Tire Size: 35 x 12.50 Shock Type: Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers Fabtech's high quality Tundra lift kit offers increased height to run 33 Inch or 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using a spacer under the factory air bags for the additional ride height. The rear suspension receives Dirt Logic 2.25 shocks for a balanced ride. Features & Benefits Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle Retains Stock Front Coilover Shocks For A Factory Ride Perfect System For The Daily Driver That Wants Increased Clearance To Run 33 Inch Or 35 Inch Tires Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT26105i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT26107i.pdf
[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Air Bag Spacer Maximum Tire Size: 35 x 12.50 Shock Type: Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS26105 (F37 FTS26105); Quantity Required: 1; Lift Kit Component; Component For K7086/ K7089}
, {Fabtech Motorsports FTS26107 (F37 FTS26107); Quantity Required: 1; Lift Kit Component; Component For K7086/ K7089}
, {Fabtech Motorsports FTS81164 (F37 FTS81164); Quantity Required: 2; Shock Absorber; Dirt Logic 2.25 ™; Nitrogen And Oil Charged; With Remote Reservoir; One Year Warranty; Non Adjustable}