Lift Kit Suspension for 2022-2023 Toyota Tundra 3-3'' Lift Front and Rear, Rear, Front

K7086M Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Rear, Front]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Rear Stealth Shock Absorbers In Kit; Black Components; With Front Strut Assembly Spacers/ Rear Coil Spring Spacers/ Front Upper Control Arms/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: With Rear Performance Shock Absorbers Color: Black Components/ Black Shock Absorbers Fabtech's high quality Tundra lift kit offers increased height to run 33 Inch or 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using coil spring spacers that provide the additional ride height. The rear shocks are replaced with Fabtech Stealth monotube shocks for an enhanced on and offroad ride. Features & Benefits Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle Retains Stock Front Coilover Shocks For A Factory Ride Perfect System For The Daily Driver That Wants Increased Clearance To Run 33 Inch Or 35 Inch Tires Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT26105i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT26106i.pdf
[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: With Rear Performance Shock Absorbers Color: Black Components/ Black Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS26105 (F37 FTS26105); Quantity Required: 1; Lift Kit Component; Component For K7086/ K7089}
, {Fabtech Motorsports FTS26106 (F37 FTS26106); Quantity Required: 1; Lift Kit Component; Component For K7086/ K7089}
, {Fabtech Motorsports FTS6188 (F37 FTS6188); Quantity Required: 2; Shock Absorber; Stealth Series; Nitrogen Gas Charged Mono Tube; Limited Lifetime Warranty; Non Adjustable Valving}