Lift Kit Suspension for 2016-2017 Toyota Tundra 3-3'' Lift Front and Rear, Front, Rear

K7077DL Fabtech Lift Kit Suspension
For [4.0, 3.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; Dirt Logic 2.5 ™; 4 Inch Front Lift; 3 Inch Rear Lift; With Front Dirt Logic 2.5 Coil Over Shock Absorbers Rear Dirt Logic 2.25 Shock Absorbers; Black Components/ Silver Shocks; With Front Steering Knuckles/ Front Coil Over Shock Absorber Mounts/ Cross Members/ Rear Leaf Spring Blocks And U Bolts/ Installation Hardware
Attributes Front Lift Amount (IN): 4 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Leaf Spring Blocks And U-Bolts Maximum Tire Size: 35 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 18 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers Fabtech's Tundra lift kit provides a 4 Inch lift height on top of the factory 2 Inch lift for clearance of 35 Inch tall tires. Once a Tundra TRD PRO is lifted with a Fabtech 4 Inch lift kit, the truck will sit at the same height as a standard Tundra with a 6 Inch suspension and 35 Inch tires. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech's proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. The stainless steel Dirt Logic 2.5 Coilovers replace the TRD PRO Coilovers with an outstanding ride quality both on and offroad. They are designed for aggressive offroad use yet have a supple on road feel. Rear Dirt Logic 2.25 shocks aid in damping the vehicle for a balanced ride. Features & Benefits Thick Steel Lower Control Arm Crossmembers Are Arched For Maximum Ground Clearance Extended Length Ductile Iron Steering Knuckles Provide Zero Bump Steer Throughout The Suspension Travel Constructed Of A Stainless Steel Body With A NitroSteel ® Piston Rod For Maximum Corrosion Resistance And Durability Triple Differential Mounts Properly Reposition The Front Differential For The Precise CV And Driveshaft Angle To Reduce Driveline Vibration At High Speed Sway Bar Link Ends To Fully Cycle Without Binding Throughout The Extended Travel Range Limited Lifetime Warranty


[Front Lift Amount (IN): 4 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Leaf Spring Blocks And U-Bolts Maximum Tire Size: 35 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 18 Wheel Offset (MM): -12.7 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS26060 (F37 FTS26060); Quantity Required: 1; Coil Over Shock Absorber; Dirt Logic 2.5; Non Adjustable 60 Percent Compression/ 40 Percent Rebound Valving; Without}
, {Fabtech Motorsports FTS26071 (F37 FTS26071); Quantity Required: 1; Lift Kit Component; Component For K7054/ K7055/ K7056}
, {Fabtech Motorsports FTS26072 (F37 FTS26072); Quantity Required: 1; Lift Kit Component; Component For K7054/ K7055/ K7056}
, {Fabtech Motorsports FTS810602 (F37 FTS810602); Quantity Required: 2; Shock Absorber; Dirt Logic; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non Adjustable}