Leveling Kit Suspension for 2007-2009 Toyota FJ Cruiser 3-3'' Lift Front, Rear

K7038DL Fabtech Leveling Kit Suspension
For [3.0] '' Lift
[Front, Rear]
Leveling Kit Suspension; Dirt Logic 2.5 Coilover System; 3 Inch Lift; Coil Over Shock Absorber; With Front Dirt Logic Coil Over Remote Reservoir Shock Absorbers/ Rear Dirt Logic External Reservoir Shock Absorbers/ Front Uniball Upper Control Arms/ Reservoir Mounting Brackets/ Installation Hardware
Attributes Amount Raised Or Lowered: 3 Inch Lift Type: Coil Over Shock Absorber Maximum Tire Size: 33 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4.62 Wheel Offset (MM): 3.17 Color: Black/ Silver Material: Stainless Steel Estimated Install Time (Hours): 2 Fabtech's Upper Control Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. These Upper Control Arms eliminate upper ball joint with super strong 1 Inch ID Stainless American Uniballs. Allows for increased wheel travel when used with Dirt Logic 2.5 Coilovers. The Chromoly tubing reduces flex found in stock arms for more positive road feel. The 17-4 Stainless Steel Heat treated Uniball pin fits into the factory ball joint taper without modification to the spindle for an easy return to stock feature. Features & Benefits Replace The Thin Stock Upper Control Arms That Are Prone To Flex And Ball Joint Failure With Heavy-Duty Construction Designed For Aggressive Off-Road Driving Provides Superior Damping For Rugged Off-Road Use With Additional Wheel Travel When Combined With The Uniball Upper Control Arms Outstanding Suspension Performance With Minimal Lift For Clearance Of 33 Inch Tall Tires Designed For Severe Duty Use With Stock And Most Aftermarket Suspension Systems Limited Lifetime Warranty


[Amount Raised Or Lowered: 3 Inch Lift Type: Coil Over Shock Absorber Maximum Tire Size: 33 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4.62 Wheel Offset (MM): 3.17 Color: Black/ Silver Material: Stainless Steel Estimated Install Time (Hours): 2 ]

Kit components:
{Fabtech Motorsports FTS26045 (F37 FTS26045); Quantity Required: 1; Control Arm; Uniball; Tubular Design With Positive 2 Degree Caster Built In; 4130 Chromoly Tubing; Painted Black}
, {Fabtech Motorsports FTS26054 (F37 FTS26054); Quantity Required: 1; Coil Over Shock Absorber; Dirt Logic 2.5; Non Adjustable 60 Percent Compression/ 40 Percent Rebound Valving; With}
, {Fabtech Motorsports FTS800692 (F37 FTS800692); Quantity Required: 2; Shock Absorber; Dirt Logic; Nitrogen And Oil Charged; With Remote Reservoir; One Year Warranty; Non Adjustable}