Lift Kit Suspension for 2023-2023 Ram 1500 4WD 6-6'' Lift Front and Rear, Rear, Front

K3086M Fabtech Lift Kit Suspension
For [6.0] '' Lift
[Full Front and Rear, Rear, Front]
Lift Kit Suspension; Stealth; 6 Inch Front Lift; 6 Inch Rear Lift; With Rear Stealth Shock Absorbers; Black Components; With Strut Spacers/ Rear Coil Spring Spacers/ Crossmembers/ Steering Knuckles/ Front Differential Skid Plate/ Installation Hardware
Attributes Front Lift Amount (IN): 6 Inch Rear Lift Amount (IN): 6 Inch Front Lift Type: Coil Over Spacer Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 20 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components This lift kit is a great choice for Ram owners looking to keep that stock ride yet want big tires and wheels. The factory suspension is relocated with heavy-duty bolt-on bracketry that will provide years of trouble-free service. The lift kit features Fabtech's proven IFS technology with extended length ductile iron steering knuckles for proper factory electronic stability control functionality. Heavy-Duty 1/4 Inch thick steel lower control arm crossmember provides superior ground clearance while the integrated front differential skid plate adds protection to the drivetrain. Rear lift is accomplished with steel coil spring spacers that utilize the factory coil springs for stock load-carrying capacity with a great highway ride. The Basic lift kit features a front Coilover spacers that utilize the factory Coilover shocks for a stock-like ride and rear Stealth monotube shocks. Features & Benefits 1/4 Inch Thick Steel Lower Control Arm Crossmembers Are Arched For Maximum Ground Clearance Four Adjustable Alignment Cams Provide A Wide Range Of Adjustment And The Fully Welded Box Design Of These Crossmembers Provides Additional Strength To The Front Suspension Extended Length Ductile Iron Steering Knuckles Retain Near Stock Track Width Keeping The Tires Under The Fenders Thick Wall Tubing And 1/4 Inch Thick Steel Is Used To Build These 6 Inch Lift Spacers Retaining The Factory Coilover Shocks For A Stock Ride Heavy-Duty Front Differential Skid Plate Is Constructed Of 1/4 Inch Thick Steel To Protect The Diff From Offroad Obstacles Integrated Differential Mounts On The Crossmembers Properly Reposition The Front Diff For The Precise CV And Driveshaft Angle Throughout The Entire Steering And Suspension Travel Range Heavy-Duty Drop Brackets Retain The Factory Link Ends At The Correct Angle For A Positive Road Feel Without Creating Binding At Full Droop Steel Rear Spring Spacers Utilize The Factory Coil Springs Retaining The Stock Load Carrying Capacity And Ride Comfort Extended Length Monotube Shocks Have A Nitro Carborized Piston Rod For Corrosion Resistance And Resist Rock Chipping Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/K3086M_INS.pdf
[Front Lift Amount (IN): 6 Inch Rear Lift Amount (IN): 6 Inch Front Lift Type: Coil Over Spacer Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 20 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS23038 (F37 FTS23038); Quantity Required: 1; Lift Kit Component; Component For Use With Lift Kit K3054`}
, {Fabtech Motorsports FTS23200 (F37 FTS23200); Quantity Required: 1; Lift Kit Component; Component For K3086/ K3087DL}
, {Fabtech Motorsports FTS23201 (F37 FTS23201); Quantity Required: 1; Lift Kit Component; Component For K3086/ K3087DL}
, {Fabtech Motorsports FTS6353 (F37 FTS6353); Quantity Required: 2; Shock Absorber; Stealth Series; Nitrogen Gas Charged Mono Tube; Limited Lifetime Warranty; Non Adjustable Valving}