Lift Kit Suspension for 2020-2023 Jeep Wrangler JL 3-3'' Lift Front and Rear, Front, Rear

K4205M Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Front And Rear Stealth Shock Absorbers In Kit; Black Components; With Front And Rear Coil Springs/ Stabilizer Bar Links/ Bump Stop Spacers/ Track Bar Bracket/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components/ Black Shock Absorbers The Dual Rate coil springs are corner specific to the JL 4xe. This keeps the vehicle level side to side while allowing for increased suspension travel. The extended length front and rear sway bar links with urethane bushings re-position the bars to work within the factory operating planes. A heavy-duty rear track bar bracket re-centers the axle while retaining the factory roll center of the vehicle with the increased ride height. Features & Benefits Features Coil Springs That Are A Dual Rate Design Allowing For Long Travel Suspension Use Offroad With A Smooth Highway Ride First Stage Of The Spring Provides A Soft Ride With The Ability To Extend For Additional Travel Second Stage Is Designed To Handle The Payload Of The Vehicle And Address Large Impact Absorption At Higher Speeds By Extending The Length Of The Links, It Prevents The Sway Bar From Going Over Center And Creating Bind At Full Extension Travel Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT24207i.pdf
[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Spring Rear Lift Type: Coil Spring Maximum Tire Size: 37 x 12.50 Shock Type: Nitrogen Gas Charged Wheel Backspacing (IN): 4.50 Minimum Wheel Diameter: 17 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components/ Black Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS24304 (F37 FTS24304); Quantity Required: 1; Lift Kit Component; Component for K4204/ K4205/ K4206}
, {Fabtech Motorsports FTS6349 (F37 FTS6349); Quantity Required: 2; Shock Absorber; Stealth Series; Nitrogen Gas Charged Mono Tube; Limited Lifetime Warranty; Non Adjustable Valving}
, {Fabtech Motorsports FTS6352 (F37 FTS6352); Quantity Required: 2; Shock Absorber; Stealth Series; Nitrogen Gas Charged Mono Tube; Limited Lifetime Warranty; Non Adjustable Valving}