Lift Kit Suspension for 2020-2021 Jeep Gladiator JT 2-2'' Lift Front and Rear, Front, Rear

G350RPELT Skyjacker Lift Kit Suspension
For [3.5, 2.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; 3-1/2 Inch Front Lift; 2 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front Dual Rate Coil Springs/ Rear Coil Spring Spacers/ Front And Rear Shock Extensions/ Front lower Control Arms/ Bump Stop Extensions/ Stabilizer Bar Links/ Installation Hardware
Attributes Front Lift Amount (IN): 3-1/2 Inch Rear Lift Amount (IN): 2 Inch Front Lift Type: Coil Springs Rear Lift Type: Coil Springs Maximum Tire Size: 38 X 13.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.5 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Take your Gladiator JT Rubicon to new heights of dominance and go get some off-road freedom in a bigger, bolder way. Claim your Trail Rated badge of honor with more ground clearance for getting you over, through and beyond the obstacles in front of you with more aggressive 38s. You can keep your Jeep engineered performance shocks, yet still upgrade the OEM coils to an optimum performance option. Skyjacker’s specifically engineered 2-stage dual rate long travel coils progress from a 1st Flex Rate to a 2nd Ride Rate. Features & Benefits The 1st Flex Rate Stage Delivers A Comfortable Ride That Expands During Full Articulation And Keeps The Tires In Contact With The Terrain The 2nd Ride Rate Stage Only Engages After Compression Past The Flex Rate The Strong Tab And Slot Interlocked Integrity Of The Rear 1-Piece Coil Spring Spacers Raises The Rear 2 Inches To Gain A More Level Stance The Front Lower Arms Are Formed Inward To Improve Tire Clearance The Longer Replacement Front Lower Control Link Arms Comes With Skyjacker Installed Pressed-In HD OEM Style Rubber Bushings The Replacement Front Adjustable Track Bar Comes With Skyjacker Installed Pressed-In HD OEM Style Rubber Bushing At The Frame Mount The Adjustable Axle Mount End Is A 3/4 Inch Heavy-Duty Rod End, Jam Nut And Alignment Bushings Front And Rear Shock Extension Relocation Brackets Reposition Your Factory Shocks Front 3.5 Inch Bump Stop Spacers Bolt Onto The Axle Bump Pad To Properly Limit The Compression Stroke Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/SKY/InstallationInstructions/I-G351-REV1.pdf
[Front Lift Amount (IN): 3-1/2 Inch Rear Lift Amount (IN): 2 Inch Front Lift Type: Coil Springs Rear Lift Type: Coil Springs Maximum Tire Size: 38 X 13.50 Shock Type: Without Shocks Wheel Backspacing (IN): 4.5 Minimum Wheel Diameter: 17 Wheel Offset (MM): -12.7 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black ]