Lift Kit Suspension for 2021-2023 GMC Yukon XL 4WD 3-3'' Lift Front and Rear, Front, Rear

K1184 Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front And Rear Strut Assembly Spacers/ Uniball Upper Control Arms/ Rear Upper Tubular Control Arms/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Strut Assembly Spacer Maximum Tire Size: 33 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components Fabtech's GM 3 Inch Lift Kit has been designed to upgrade late model 1500 SUV's equipped with factory standard suspension with increased clearance to run 35 Inch tall tires while retaining the stock ride quality. The front suspension receives Fabtech's high quality Ball Joint Upper Control Arms that are vastly superior to the stock arms providing strength and longevity to the vehicle. They are construction of 1-1/4 Inch Outer Diameter, 0.120 Inch wall DOM tubing with heavy-duty high angle ball joints. These ball joints are substantially larger than the factory and offer increased operating angles without bind at full droop. The replacement UCA's have been designed to work in conjunction with Fabtech's coil spring spacers providing 3 Inch of lift utilizing the factory GM Coilover shocks. The rear receives extended length upper link arms to allow for increased travel without bind. The geometry of these links allows for proper alignment to the rear independent suspension with the new ride height. As with the front the rear also receives coil spring spacers that utilize the factory GM Coilover shocks. Features & Benefits Heavy-Duty DOM Tube Control Arms For Additional Suspension Strength Large High Angle Ball Joint For No Bind Throughout The Suspension Travel Allows For Factory Specification Alignment Front And Rear Retains Factory Coilover For A Stock Ride Quality Perfect System For The Daily Driver That Wants Increased Clearance To Run 35 Inch Tires Economically Priced GM Lift Kit With Fabtech Quality Limited Lifetime Warranty


[Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Strut Assembly Spacer Maximum Tire Size: 33 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS21290 (F37 FTS21290); Quantity Required: 1; Lift Kit Component; Component For K1188DL}
, {Fabtech Motorsports FTS21291 (F37 FTS21291); Quantity Required: 1; Lift Kit Component; Component For K1188DL}