Lift Kit Suspension for 2017-2022 Ford F-350 Super Duty 4WD 8-8'' Lift Front and Rear

K2301DL Fabtech Lift Kit Suspension
For [8.0] '' Lift
[Full Front and Rear]
Lift Kit Suspension; Dirt Logic 4.0; 8 Inch Front Lift; 8 Inch Rear Lift; With Front Rear Dirt Logic 4.0 Remote Reservoir Coil Over Shock Absorbers and Rear Dirt Logic 2.25 Shock Absorbers In Kit; Black Components/ Silver Shock Absorbers; With Front Coil Over Mounts/ Radius Arms/ Track Bar Bracket/ Pitman Arm/ Front Bump Stops/ Stabilizer Bar Brackets/ Brake Line Brackets/ Steering Stabilizer Brackets/ Rear Lift Blocks/ Add-A-Leafs and U-Bolts/ Installation Hardware; Requires Driveshaft
Attributes Front Lift Amount (IN): 8 Inch Rear Lift Amount (IN): 8 Inch Front Lift Type: Coil Over Shock Absorber Rear Lift Type: Add-A-Leaf/ Blocks/ U-Bolts Maximum Tire Size: 40 x 15.50 Shock Type: Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: With Front Rear Dirt Logic 4.0 Remote Reservoir Coil Over Shocks, Rear Dirt Logic 2.25 Shocks Color: Black Components/ Silver Shock Absorbers Fabtech's 8 Inch Radius Arm system for the Ford Super Duty is built to handle the on and offroad demands of the truck enthusiast. This Radius Arm system is a heavy-duty upgrade to the factory suspension and will provide additional strength to the vehicle. The heart of this quality system is Fabtech's legendary tubular Radius Arms. The design of these arms comes from Fabtech's racing experience and are built with a tubular structure reinforced by dimple die side plates and heavy gusseting for rugged offroad use. They are superior in strength to the stock stamped arms. Unique to this 8 Inch system is Fabtech's extended length Track Bar to address the hyper sensitive steering box of the late model Super Duty. Fabtech is the only manufacturer with this ground breaking system that offers proper steering performance. Fabtech's extended length Track Bar is 4 Inch longer than stock and is offset to the driver side with a stout 1/4 Inch thick steel mounting bracket. This design helps keep the Track Bar and Draglink closer to parallel than the factory angles to reduce push in the steering. The Track Bar allows for full lock steering of 15.50 wide tires with 4-3/4 Inch BS wheels. This high quality 8 Inch System provides increased strength and performance for the demanding Super Duty enthusiast. Features & Benefits 5 Ton Joints Have Been Proven In Military Use For Over 10 Years And Are Quiet And Strong Massive 4 Inch Diameter Stainless Steel Body With 1.25 Inch NitroSteel ® Piston Rod For Maximum Corrosion Resistance And Durability For The Most Aggressive Driving Conditions Dropped Pitman Arm Designed Specifically For The Super Duty To Work In Conjunction With The Factory Drag Link And Fabtech's Extended Length Track Bar For Proper Steering Functionality Heavy-Duty 1/4 Inch Thick Steel Brackets Extend The Factory Bump Stop Cushions Down To Eliminate Over Cycling Of The Suspension Bracket's Semi Boxed Construction Can Handle The Full Impact Compression Of The Massive Super Duty Cast Iron 5.75 Inch Rear Lift Block With An Integrated Bump Stop Replace The Stock Blocks For Additional Lift Without Changing The Ride Quality Of The Factory Rear Suspension Or Load Carrying Capacity Provides Excellent Damping For Offroad Use Limited Lifetime Warranty


[Front Lift Amount (IN): 8 Inch Rear Lift Amount (IN): 8 Inch Front Lift Type: Coil Over Shock Absorber Rear Lift Type: Add-A-Leaf/ Blocks/ U-Bolts Maximum Tire Size: 40 x 15.50 Shock Type: Gas Charged Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: With Front Rear Dirt Logic 4.0 Remote Reservoir Coil Over Shocks, Rear Dirt Logic 2.25 Shocks Color: Black Components/ Silver Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS22272 (F37 FTS22272); Quantity Required: 1; Lift Kit Component; Component For K2297DL/ K2265DL/ K2301DL}
, {Fabtech Motorsports FTS22279 (F37 FTS22279); Quantity Required: 1; Lift Kit Component; Component For K2297DL/ K2265DL/ K2266DL/ K2301DL/ K2302DL}
, {Fabtech Motorsports FTS810052 (F37 FTS810052); Quantity Required: 2; Shock Absorber; Dirt Logic; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non Adjustable}
, {Fabtech Motorsports FTS835237D (F37 FTS835237D); Quantity Required: 1; Lift Kit Component; Component For K2301DL/ K2302DL/ K2303DL}
, {Fabtech Motorsports FTS835237P (F37 FTS835237P); Quantity Required: 1; Lift Kit Component; Component For K2301DL/ K2302DL/ K2303DL}