Lift Kit Suspension for 1999-2004 Ford F-250 Super Duty 4WD 2-2'' Lift Front and Rear, Front, Rear
€0.00
Tax included
Lift Kit Suspension SST ® Stage 2 2 Inch Front Lift 2 Inch Rear Lift Without Shock Absorbers In Kit - Shock Change Not Necessary Black Components Includes Front Add-A-Leaf/ Rear Blocks/ U-Bolts and Hardware
69-2085 ReadyLift Lift Kit Suspension For [2.0] '' Lift [Full Front and Rear, Front, Rear] Lift Kit Suspension; SST ® Stage 2; 2 Inch Front Lift; 2 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; Includes Front Add-A-Leaf/ Rear Blocks/ U-Bolts and Hardware
Attributes Front Lift Amount (IN): 2 Inch Rear Lift Amount (IN): 2 Inch Front Lift Type: Add-A-Leaf Rear Lift Type: Leaf Spring Block Maximum Tire Size: 35 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: OEM Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components
This system includes a "mini leaf pack" that, once installed under the factory leaf spring pack, raises the front of the F250 4WD Super Duty trucks a total of 2.0 Inch which is what is required to obtain a level stance. To lift the rear, tested OEM-style 4.0 Inch cast iron rear blocks with built-in pinion angle correction and bump stop landings replace the factory 2.0 Inch block for additional lift of 2.0 Inch. This kit also includes a carrier bearing spacer which is intended for use on trucks with a two-piece drive shaft. This set up establishes a mild lift with a slight rake maintained for towing or hauling. The kit comes with new longer front and rear U-bolts and hardware as well as important pan-hard bar alignment bushings. This kit will allow for up to 35 Inch tall tires.
Features & Benefits Cast Iron Rear Blocks With Built In Pinion Angle Correction A Carrier Bearing Spacer Which Is Intended For Use On Trucks With A Two-Piece Drive Shaft Set Up Establishes A Mild Lift With A Slight Rake Maintained For Towing Or Hauling Comes With New Longer Front And Rear U Bolts And Hardware As Well As Important Pan Hard Bar Alignment Bushings Limited 1 Year Warranty
https://vehiclepartimages.com/PMDT/RDL/InstallationInstructions/69-2085_99-04_F250_4x4_Instructions.pdf
[Front Lift Amount (IN): 2 Inch
Rear Lift Amount (IN): 2 Inch
Front Lift Type: Add-A-Leaf
Rear Lift Type: Leaf Spring Block
Maximum Tire Size: 35 x 12.50
Shock Type: Without Shocks
Wheel Backspacing (IN): 5.00
Minimum Wheel Diameter: OEM
Wheel Offset (MM): 0
Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary
Color: Black Components
]