Leveling Kit Suspension for 2008-2016 Ford F-250 Super Duty 4WD 2.5-2.5'' Lift Front, Rear

K2376DL Fabtech Leveling Kit Suspension
For [2.5] '' Lift
[Front, Rear]
Leveling Kit Suspension; Dirt Logic; 2-1/2 Inch Lift; Coil Springs; With Coil Springs/ Track Bar/ Front And Rear Dirt Logic Shock Absorbers/ Installation Hardware
Attributes Amount Raised Or Lowered: 2-1/2 Inch Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4 Wheel Offset (MM): -25.4 Color: Black Material: Stainless Steel Estimated Install Time (Hours): 2 This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2-1/2 Inch lift kit, you can run 35 Inch tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. They help retain the factory caster specifications for optimum driveability. After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar. To address this issue Fabtech provides a heavy-duty adjustable track bar. The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit comes with Dirt Logic 2.25 shocks. They will provide a superior ride quality both on and offroad with excellent damping for offroad use. Features & Benefits Fabtech's Coil Springs Retain The Factory Load Carrying Capacity Fabtech Track Bar Allows For On The Vehicle Adjustment To Center The Axle Under The Vehicle Comes With Sway Bar Drop Brackets To Reposition The Front Bar Suspension Kit Utilizes The Factory Bump Stops Without Extensions Easy To Install Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT92031i.pdf
[Amount Raised Or Lowered: 2-1/2 Inch Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4 Wheel Offset (MM): -25.4 Color: Black Material: Stainless Steel Estimated Install Time (Hours): 2 ]

Kit components:
{Fabtech Motorsports FTS22328 (F37 FTS22328); Quantity Required: 1; Lift Kit Component; Component For K2376}
, {Fabtech Motorsports FTS811512 (F37 FTS811512); Quantity Required: 2; Shock Absorber; Dirt Logic; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non Adjustable}
, {Fabtech Motorsports FTS811522 (F37 FTS811522); Quantity Required: 2; Shock Absorber; Dirt Logic; Nitrogen And Oil Charged; Without Remote Reservoir; One Year Warranty; Non Adjustable}
, {Fabtech Motorsports FTS92030 (F37 FTS92030); Quantity Required: 1; Track Bar; 0-4 Inch Lift; Adjustable; Black}