Leveling Kit Suspension for 2017-2023 Ford F-250 Super Duty 4WD 2.5-2.5'' Lift Front, Rear
€0.00
Tax included
Leveling Kit Suspension Budget 2-1/2 Inch Lift Coil Springs With Coil Springs/ Track Bar Bracket/ Front And Rear Stealth Shock Absorbers/ Installation Hardware
K2339M Fabtech Leveling Kit Suspension For [2.5] '' Lift [Front, Rear] Leveling Kit Suspension; Budget; 2-1/2 Inch Lift; Coil Springs; With Coil Springs/ Track Bar Bracket/ Front And Rear Stealth Shock Absorbers/ Installation Hardware
Attributes Amount Raised Or Lowered: 2-1/2 Inch Lift Type: Coil Spring Maximum Tire Size: 35 x 12.50 Includes Shock/Struts: Yes Minimum Wheel Diameter: 17 Wheel Backspacing (IN): 4.75 Wheel Offset (MM): 6.35 Color: Black Material: Steel Estimated Install Time (Hours): 2
This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2-1/2 Inch lift kit, you can run 35 Inch tall tires with ease. Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This extra travel helps when offroading in rugged terrain. Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation. This suspension kit utilizes the factory bump stops without extensions. This allows for more travel with the Fabtech coil springs and components. Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. To address this issue Fabtech provides a heavy-duty 1/4 Inch thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners. This Super Duty lift kit includes Fabtech Stealth shocks. They are a sealed monotube shock that has a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They will provide a great highway ride with good offroad damping capacity.
Features & Benefits Provide A Superior Ride Quality Both On And Off-Road Provide A Great Highway Ride With Good Offroad Damping Capacity Sealed Monotube Shock That Has A Nitrocarb Piston Rod For Corrosion Resistance And Resist Rock Chipping Fabtech's Coil Springs Retain The Factory Load Carrying Capacity While Providing Increased Suspension Travel Limited Lifetime Warranty
[Amount Raised Or Lowered: 2-1/2 Inch Lift
Type: Coil Spring
Maximum Tire Size: 35 x 12.50
Includes Shock/Struts: Yes
Minimum Wheel Diameter: 17
Wheel Backspacing (IN): 4.75
Wheel Offset (MM): 6.35
Color: Black
Material: Steel
Estimated Install Time (Hours): 2
]