Lift Kit Suspension for 2021-2023 Ford F-150 4WD 3-3'' Lift Front and Rear

K2371M Fabtech Lift Kit Suspension
For [6.0, 3.0] '' Lift
[Full Front and Rear]
Lift Kit Suspension; 6 Inch Front Lift; 3 Inch Rear Lift; With Rear Stealth Shock Absorbers; Black Components; With Front And Rear Crossmembers/ Front Bump Stops/ Steering Knuckles/ Tie Rods/ Coil Over Spacers/ Skid Plate/ Stabilizer Bar Mounts/ Rear Lift Blocks And U Bolts/ Installation Hardware
Attributes Front Lift Amount (IN): 6 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Over Spacer Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 37 x 12.50 Shock Type: Hydraulic Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 20 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components Fabtech's world-renowned IFS suspension design for the Ford F150 provides excellent drivability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce driver fatigue while improving the overall drivability of the vehicle. The near-stock track width keeps the tires under the fenders for a clean appearance. Fabtech's proprietary steering knuckle geometry provides an excellent lock to lock turning radius to maneuver in tight spots. Heavy-Duty 1/4 Inch thick steel crossmembers feature eccentric style alignment cams for easy adjustment. Triple front diff mounts reposition the differential for vibration-free operation at high speed. The factory coilover shocks are relocated from the bottom to allow for full steering while achieving 6 Inch of lift. At the rear of the vehicle, the factory 2 Inch block is replaced with a 5 Inch Block and u-bolt system. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling. Features & Benefits 1/4 Inch Thick Steel Lower Control Arm Crossmembers Are Arched For Maximum Ground Clearance Welded Box Design Of These Crossmembers Provides Additional Strength To The Front Suspension Fabtech's Extended Length Ductile Iron Steering Knuckles Provide Zero Bump Steer Throughout The Suspension Travel Oversized Tie Rods Are Provided To Replace The Stock Units That Are Designed To Handle Oversized Tires Factory Coilovers Are Relocated With Heavy-Duty Lower Mounts To Lift The Vehicle While Retaining The Stock Ride Quality Heavy-Duty Front Differential Skid Plate Is Constructed Of 1/4 Inch Thick Steel To Protect The Diff From Offroad Obstacles Extended Length Monotube Shocks Have A Nitro Carborized Piston Rod For Corrosion Resistance And Resist Rock Chipping Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/K2371M_INS.pdf
[Front Lift Amount (IN): 6 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Over Spacer Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 37 x 12.50 Shock Type: Hydraulic Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 20 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS22324 (F37 FTS22324); Quantity Required: 1; Lift Kit Component; Component For K2371}
, {Fabtech Motorsports FTS22326 (F37 FTS22326); Quantity Required: 1; Lift Kit Component; Component For K2371}
, {Fabtech Motorsports FTS6266 (F37 FTS6266); Quantity Required: 2; Shock Absorber; Stealth Series; Nitrogen Gas Charged Mono Tube; Limited Lifetime Warranty; Non Adjustable Valving}