Leveling Kit Suspension for 2021-2023 Ford F-150 4WD 2-2'' Lift Front, Rear

K2374DL Fabtech Leveling Kit Suspension
For [2.0] '' Lift
[Front, Rear]
Leveling Kit Suspension; Uniball; 2 Inch Lift; Coil Over Shocks; With Coil Over Shocks/ Upper Control Arms/ Rear Shock Absorbers/ Installation Hardware
Attributes Amount Raised Or Lowered: 2 Inch Lift Type: Coil Over Shock Absorber Maximum Tire Size: 30 x 11 Includes Shock/Struts: Yes Minimum Wheel Diameter: 18 Wheel Backspacing (IN): 5 Wheel Offset (MM): 0 Color: Black Estimated Install Time (Hours): 2 Fabtech's high-quality F150 lift kit offers increased front suspension travel for enhanced offroad capabilities with clearance to run 33" tall tires. The stance of the vehicle will become more level front to rear for an aggressive look. The factory F150 upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1.25 Inch OD 4130 Chromoly steel tubing. Fabtech arms will add rigidity and strength to the F150 suspension. High-quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout F150 upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on-road feel. The Fabtech upper control arms have been designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel. The rear suspension receives Dirt Logic 2.25 shocks for a balanced ride. All Dirt Logics are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance in the harshest conditions. These Dirt Logics have been extensively tested and tuned to provide a superior ride quality both on and offroad. This system is perfect for those that want increased suspension performance with a low lift height. A great choice for daily drivers that want a clean look with the ability to hit the trails on weekends. Features & Benefits Eliminate Factory Upper Ball Joint With Super Strong 1 Inch ID Stainless Steel American Uniball For Increased Suspension Strength Additional Caster Is Built Into Arms For Enhanced Align Ability With Oversized Tires 17-4 Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle For Easy Return To Stock Feature 1.25 Inch OD 0.120 Inch Wall 4130 Chromoly Tubing Reduces Flex Found In Stock Plastic Arms For More Positive Road Feel Limited Lifetime Warranty


[Amount Raised Or Lowered: 2 Inch Lift Type: Coil Over Shock Absorber Maximum Tire Size: 30 x 11 Includes Shock/Struts: Yes Minimum Wheel Diameter: 18 Wheel Backspacing (IN): 5 Wheel Offset (MM): 0 Color: Black Estimated Install Time (Hours): 2 ]

Kit components:
{Fabtech Motorsports FTS22252 (F37 FTS22252); Quantity Required: 1; Leveling Kit Component; Component For K2245DL}
, {Fabtech Motorsports FTS22327 (F37 FTS22327); Quantity Required: 1; Lift Kit Component; Component For K2374/ K2375}
, {Fabtech Motorsports FTS811332 (F37 FTS811332); Quantity Required: 2; Leveling Kit Component; Component For K2245DL/ K2246DL}