Lift Kit Suspension for 2017-2020 Ford F-150 4-4'' Lift Front and Rear

K2263 Fabtech Lift Kit Suspension
For [4.0] '' Lift
[Full Front and Rear]
Lift Kit Suspension; 4 Inch Front Lift; 4 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Front and Rear Shock Extensions/ Steering Knuckles/ Control Arm Relocation Brackets/ Differential Brackets/ Differential Skid Plate/ Crossmembers/ Lift Blocks And U Bolts/ Installation Hardware
Attributes Front Lift Amount (IN): 4 Inch Rear Lift Amount (IN): 4 Inch Front Lift Type: Steering Knuckles Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 37 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components Fabtech's 4 Inch System for the 2017 to 19 Ford F150 Raptor provides increased suspension height which allows the use of 37 Inch tall tires and retains the factory SVT control arms and Fox Shox. This 4 Inch system features heavy-duty ductile iron steering knuckles designed to handle 37 Inch tall tires with the vehicle's ESC (electronic stability control) and Traction Control. Typically 37 Inch tires will cause steering and brake issues on the factory Ford steering knuckles. Fabtech knuckles are designed for the oversized tires and will provide years of trouble free service. The Raptor SVT control arms are relocated with 1/4 Inch thick steel Crossmembers retaining the travel features of the vehicle for offroad use. The factory Fox Shox are also retained with super stout front and rear shock extensions. To keep the front CV angles proper with the new ride height the front differential is relocated and comes with a 1/4 Inch thick steel skid plate for protection. Features & Benefits Provides Increased Suspension Height To Allow Use Of 37 Inch Tall Tires While Retaining The Factory SVT Control Arms And Fox Shocks Features Heavy-Duty Ductile Iron Steering Knuckles Designed To Handle 37 Inch Tall Tires With The Vehicle's ESC (Electronic Stability Control) And Traction Control Knuckles Are Designed For The Oversized Tires And Will Provide Years Of Trouble Free Service Control Arms Are Relocated With 1/4 Inch Thick Steel Crossmembers Retaining The Travel Features Of The Vehicle For Off-Road Use Factory Fox Shocks Are Also Retained With Super Stout Front And Rear Shock Extensions To Keep The Front CV Angles Proper With The New Ride Height The Front Differential Is Relocated Limited Lifetime Warranty


[Front Lift Amount (IN): 4 Inch Rear Lift Amount (IN): 4 Inch Front Lift Type: Steering Knuckles Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 37 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS22267 (F37 FTS22267); Quantity Required: 1; Lift Kit Component; Component For K2263}
, {Fabtech Motorsports FTS22268 (F37 FTS22268); Quantity Required: 1; Lift Kit Component; Component For K2263}