Lift Kit Suspension for 2017-2020 Chevrolet Tahoe 6-6'' Lift Front and Rear, Front, Rear

K1125 Fabtech Lift Kit Suspension
For [6.0] '' Lift
[Full Front and Rear, Front, Rear]
Lift Kit Suspension; Basic; 6 Inch Front Lift; 6 Inch Rear Lift; Without Shock Absorbers In Kit - Shock Change Not Necessary; Black Components; With Strut Spacers/ Steering Knuckles/ Skid Plate/ Front and Rear Crossmembers/ Rear Coil Springs/ Tie Rod Ends/ Differential Brackets/ Rear Shock Extensions/ Rear Upper And Lower Control Arms/ Rear Stabilizer Bar Links/ Track Bar Bracket/ Installation Hardware
Attributes Front Lift Amount (IN): 6 Inch Rear Lift Amount (IN): 6 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Coil Spring Maximum Tire Size: 33 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 17 Wheel Offset (MM): 12.7 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components This high quality 6 Inch system retains the factory track width keeping the tires under the fenders for a clean appearance. It has been designed to clear 33 Inch tall tires while providing a factory like ride quality. Heavy-Duty 1/4 Inch thick steel lower control arm Crossmembers provide superior ground clearance while the integrated front differential Skid Plate adds protection to the drivetrain. The front differential is relocated in a manner to reduce driveline vibration when in 4 wheel drive mode at highway speeds. The system utilizes a simplistic upper Coilover spacer that does not require the disassembly of the shock for a quick installation. The factory rear shocks are retained with extended length mounts. Fabtech's rear Coil Springs provide increased ride height with a comfortable highway ride. New upper and lower rear Link Arms re-positions the differential to the precise pinion angle to eliminate driveline vibration at all speeds. Rear extended length Sway Bar Links and heavy-duty Track Bar Bracket retains the proper roll center of the vehicle for both on and off-road use. This system passes FMVSS 126 standards for stability control functionality as tested by an independent lab. Features & Benefits Crossmembers: 1/4 Inch Thick Steel Lower Control Arm Crossmembers Are Arched For Maximum Ground Clearance Steering Knuckles: Extended Length Ductile Iron Steering Knuckles Retain The Stock Track Width Keeping The Tires Under The Fenders Steering Knuckles Are Designed To Work In Conjunction With The Factory ESC For Proper Functionality At All Speeds Coilover Spacers: Thick Wall Tubing And 1/4 Inch Thick Steel Plate Is Used To Build These 6 Inch Lift Spacers That Retain The Factory Coilover Shocks For A Stock Ride Skid Plate: A Heavy-Duty Front Differential Skid Plate Is Constructed Of 1/4 Inch Thick Steel To Protect The Diff From Off-Road Obstacles Rear Track Bar Bracket: Heavy-Duty 1/4 Inch Thick Steel Bracket Relocates The Track Bar To Retain The Proper Roll Center Of The Vehicle Differential Mounts: Integrated Differential Mounts On The Crossmembers Properly Reposition The Front Diff For The Precise CV And Driveshaft Angle To Reduce Driveline Vibration At High Speed Limited Lifetime Warranty


[Front Lift Amount (IN): 6 Inch Rear Lift Amount (IN): 6 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Coil Spring Maximum Tire Size: 33 x 12.50 Shock Type: Without Shocks Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 17 Wheel Offset (MM): 12.7 Shocks: Without Shock Absorbers In Kit - Shock Change Not Necessary Color: Black Components ]

Kit components:
{Fabtech Motorsports FTS21170 (F37 FTS21170); Quantity Required: 1; Lift Kit Component; Component For K1083/ K1083DB/ K1084/ K1084DB/ K1085DB/ K1086DB}
, {Fabtech Motorsports FTS21171 (F37 FTS21171); Quantity Required: 1; Lift Kit Component; Component For K1083/ K1084}
, {Fabtech Motorsports FTS21246 (F37 FTS21246); Quantity Required: 1; Lift Kit Component; Component For FTS21170}
, {Fabtech Motorsports FTS21247 (F37 FTS21247); Quantity Required: 1; Lift Kit Component; Component For FTS21170}