Lift Kit Suspension for 2007-2008 Chevrolet Silverado 3500 HD 4WD 6-6'' Lift Front and Rear

K1030 Fabtech Lift Kit Suspension
For [8.0, 6.0] '' Lift
[Full Front and Rear]
Lift Kit Suspension; Performance System; 8 Inch Front Lift; 6 Inch Rear Lift; With Front And Rear Performance Shock Absorbers; Black Components/ White Shock Absorbers; Includes Driver and Passenger Knuckles/ Control Arm Crossmembers/ Upper Control Arms With Ball Joints/ Differential Skid Plate/ Impact Struts/ Torsion Bar Drop Brackets/ Rear 4in. Lift Block/ 2in. Rear Add-A-Leaf/ Carrier Bearing Drop Bracket/ All Necessary Hardware/ Installation Sheet
Attributes Front Lift Amount (IN): 8 Inch Rear Lift Amount (IN): 6 Inch Front Lift Type: Torsion Bar Drop Bracket Rear Lift Type: Add-a-leaf/ Blocks Maximum Tire Size: 37 x 13.50 Shock Type: Hydraulic Wheel Backspacing (IN): 4.62 Minimum Wheel Diameter: 17 Wheel Offset (MM): -10 Shocks: With Shocks In Kit Color: Black Components/ White Shock Absorbers The 8 Inch Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4 Inch thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 Inch of lift without adjustment to the torsion bars allowing the use of 37 Inch tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on vehicles with the stock driveshaft. On late model vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4 Inch block kit with 2 Inch add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Features & Benefits Provide A Superior Ride Quality Both On And Off-Road Ultimate In Suspension Performance Made In USA Fast And Trouble-Free Installation Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT21068i.pdf
[Front Lift Amount (IN): 8 Inch Rear Lift Amount (IN): 6 Inch Front Lift Type: Torsion Bar Drop Bracket Rear Lift Type: Add-a-leaf/ Blocks Maximum Tire Size: 37 x 13.50 Shock Type: Hydraulic Wheel Backspacing (IN): 4.62 Minimum Wheel Diameter: 17 Wheel Offset (MM): -10 Shocks: With Shocks In Kit Color: Black Components/ White Shock Absorbers ]

Kit components:
{Fabtech Motorsports FTS21012BK (F37 FTS21012BK); Quantity Required: 1; Lift Kit Component; Component Box; Component For Lift Kits K1015/ K1015DB/ K1030/ K1030DB}
, {Fabtech Motorsports FTS21013BK (F37 FTS21013BK); Quantity Required: 1; Lift Kit Component; Component Box; Component For Lift Kits K1015/ K1015DB/ K1030/ K1030DB}
, {Fabtech Motorsports FTS21068BK (F37 FTS21068BK); Quantity Required: 1; Lift Kit Component; Component Box; Component For Lift Kits K1030/ K1030DB}
, {Fabtech Motorsports FTS7192 (F37 FTS7192); Quantity Required: 2; Shock Absorber; Performance Twin Tube; Hydraulic; One Year Warranty; Not Adjustable; Without Shock Boots; Single}
, {Fabtech Motorsports FTS7266 (F37 FTS7266); Quantity Required: 2; Shock Absorber; Performance Twin Tube; Hydraulic; One Year Warranty; Not Adjustable; Without Shock Boots; Single}