Lift Kit Suspension for 2020-2021 Chevrolet Silverado 1500 1-1'' Lift Front and Rear
€0.00
Tax included
Lift Kit Suspension Performance 1-1/2 Inch Front Lift 1 Inch Rear Lift With Rear Performance Shock Absorbers In Kit Black Components With Front Strut Assembly Spacers/ Front Upper Control Arms/ Rear Lift Blocks/ U Bolts/ Installation Hardware
K1152 Fabtech Lift Kit Suspension For [1.5, 1.0] '' Lift [Full Front and Rear] Lift Kit Suspension; Performance; 1-1/2 Inch Front Lift; 1 Inch Rear Lift; With Rear Performance Shock Absorbers In Kit; Black Components; With Front Strut Assembly Spacers/ Front Upper Control Arms/ Rear Lift Blocks/ U Bolts/ Installation Hardware
Attributes Front Lift Amount (IN): 1-1/2 Inch Rear Lift Amount (IN): 1 Inch Front Lift Type: Strut Assembly Spacer Rear Lift Type: Blocks And U-Bolts Maximum Tire Size: 33 x 11.50 Shock Type: Hydraulic Wheel Backspacing (IN): 5.00 Minimum Wheel Diameter: 18 Wheel Offset (MM): 0 Shocks: With Shocks In Kit Color: Black Components
Fabtech's Upper Control Arm lift kit provides a 1-1/2 Inch increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2 Inch lift. With the addition of this 1-1/2 Inch lift kit, the vehicle will sit as high as a standard model with a 3-1/2 Inch lift kit and clear a 33 Inch tall tire. The tubular Upper Control Arms with heavy-duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. The Performance rear shocks are a twin tube design provide a good highway ride with the ability to handle offroad use.
Features & Benefits Increased Ground Clearance Extended Range Upper Ball Joints Provide A Smooth Quiet Ride Increased Fender Clearance For 33 Inch Tall Tires Suspension Can Be Restored To Stock Easy To Install Limited Lifetime Warranty
[Front Lift Amount (IN): 1-1/2 Inch
Rear Lift Amount (IN): 1 Inch
Front Lift Type: Strut Assembly Spacer
Rear Lift Type: Blocks And U-Bolts
Maximum Tire Size: 33 x 11.50
Shock Type: Hydraulic
Wheel Backspacing (IN): 5.00
Minimum Wheel Diameter: 18
Wheel Offset (MM): 0
Shocks: With Shocks In Kit
Color: Black Components
]
Kit components: {Fabtech Motorsports FTS21271 (F37 FTS21271); Quantity Required: 1; Lift Kit Component; Component For K1152M} , {Fabtech Motorsports FTS7333 (F37 FTS7333); Quantity Required: 2; Shock Absorber; Performance Twin Tube; Hydraulic; One Year Warranty; Not Adjustable; Without Shock Boots; Single}